2.Firmly hold the cover and slide it toward the rear panel for about half an inch until it is disengaged from the chassis.
1/ 2 inch distance
3.Lift the cover from the chassis.
2.1.3Installing the cover
1.Position the cover on top of the chassis with the thumbscrews on the rear, and leaving a gap of about half an inch from the front panel.
Side markings
2.Make sure that the side markings on the cover (two on each side) are aligned to the grooves on the chassis.
Grooves
3.Slide the cover toward the front until it snaps in place.
4.Tighten the thumbscrews on the rear to secure the cover.
Thumbscrews
ASUS | 2 - 3 |