2.5Expansion slot

The barebone server comes with a riser card bracket installed on the 64-bit expansion slot. You need to remove the bracket if you wish to install a PCI-X expansion card.

2.5.1Installing expansion cards

To install a short expansion card:

1.Use a Phillips (cross) screwdriver to remove the screw that secures the riser card to the chassis.

2.Firmly hold the riser card bracket, then pull it up to detach it from the PCI-X slot on the mother- board.

3.Remove the screw that secures the slot metal cover.

4.Install PCI-X cards to the bracket as shown, then secure the card with a screw.

ASUS RS160-E3/PS4

2 - 11