5.Carefully insert the drive tray and push it all the way to the depth of the bay until just a small fraction of the tray edge protrudes.
When installed, the SCSI connector on the drive connects to the SCSI connector on the backplane. Refer to section “2.7.2 SCSI backplane” for illustration.
6.Push the tray lever until it clicks, and secures the drive tray in place. The drive tray is correctly placed when its front edge aligns with the bay edge.
7.Repeat steps 1 to 6 if you wish to install a second ,third and/or fourth drive.
2 - 10 | Chapter 2: Hardware setup |