Legacy USB Support [Auto]

Allows you to enable or disable support for legacy USB devices. Setting to [Auto] allows the system to detect the presence of legacy USB devices at startup. If detected, the USB controller legacy mode is enabled. If no legacy USB device is detected, the legacy USB support is disabled.

Configuration options: [Disabled] [Enabled] [Auto]

USB 2.0 Controller [Enabled]

Allows you to enable or disable the USB 2.0 controller.

Configuration options: [Enabled] [Disabled]

USB 2.0 Controller Mode [HiSpeed]

Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or FullSpeed (12 Mbps). Configuration options: [FullSpeed] [HiSpeed]

BIOS SETUP UTILITY

Advanced

USB Mass Storage Device Configuration

USB Mass Storage Reset Delay

[20 Sec]

Number of seconds POST waits for the USB mass device after start unit command.

Select Screen

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.

USB Mass Storage Reset Delay[20 Sec]

Allows you to set the number of seconds POST waits for the USB mass device after start unit command. Configuration options:

[10 Sec] [20 Sec] [30 Sec] [40 Sec]

5 - 24

Chapter 5: BIOS setup