Manuals / Asus / Computer Equipment / Network Router

Asus RTAC68U manual Canada, Industry Canada IC Notices, Radio Frequency RF Exposure Information

Models: RTAC68U

1 129

Download 129 pages 54.54 Kb

Page 115

Canada, Industry Canada (IC) Notices

This Class B digital apparatus complies with Canadian ICES-003 and RSS-210.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency (RF) Exposure Information

The radiated output power of the ASUS Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The ASUS Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.

This device has been evaluated for and shown compliant with the IC Specific Absorption Rate (“SAR”) limits when installed in specific host products operated in portable exposure conditions (antennas are less than 20 centimeters of a person’s body).

This device has been certified for use in Canada. Status of the listing in the Industry Canada’s REL (Radio Equipment List) can be found at the following web address: http://www.ic.gc.ca/app/sitt/ reltel/srch/nwRdSrch.do?lang=eng

Additional Canadian information on RF exposure also can be found at the following web: http://www.ic.gc.ca/eic/site/smt-gst. nsf/eng/sf08792.html

Canada, avis d’Industry Canada (IC)

Cet appareil numérique de classe B est conforme aux normes

115

Image 115

Asus RTAC68U manual Canada, Industry Canada IC Notices, Radio Frequency RF Exposure Information

Contents

RT-AC68U Wireless-AC1900 Dual Band Gigabit RouterUser Guide Copyright 2013 ASUSTeK Computer Inc. All Rights Reserved E8119 First Edition MarchGetting to know your wireless router Table of contentsGetting started Configuring the General settingsIPv6 Table of contentsConfiguring the Advanced Settings Using AiCloudTable of contents TroubleshootingUtilities Appendices1.2 Package contents 1 Getting to know your wireless router1.1 Welcome 1 LAN 1~4 LED 1.3 Your wireless router5 Power LED Flashing slow Rescue mode14 Reset button Specifications8 Power button Press this button to power on or off the stystem1.4 Positioning your router IEEE 802.11a/b/g/n/ac wireless capability An installed TCP/IP service 1.5 Setup RequirementsEthernet RJ-45 LAN port 10Base-T/100Base-TX/ 1000BaseTX 1.6.1 Wired connection 1.6 Router SetupTo set up your wireless router via wired connection To set up your wireless router via wireless connection 1.6.2 Wireless connection4. Install an IEEE 802.11a/b/g/n/ac WLAN adapter on your computer 2.1 Logging into the Web GUI 2 Getting startedTo log into the web GUI To use QIS with auto-detection 2.2 Quick Internet Setup QIS with Auto- detectionfor Automatic IP DHCP for PPPoE, PPTP, and L2TP The auto-detection of your ISP connection type takes place when for Static IPPage To connect to your network 2.3 Connecting to your wireless network3.1 Using the Network Map 3 Configuring the General settingsTo set up the wireless security settings 3.1.1 Setting up the wireless security settings2.4GHz security settings To manage your network clients 3.1.2 Managing your network clients3.1.3 Monitoring your USB device To monitor your USB device To safely remove the USB disk Safely removing the USB diskTo create a guest network 3.2 Creating a Guest Network4. To configure additional options, click Modify 5. Click Yes on the Enable Guest Network screen7. Select an Authentication Method 10. Select Disable or Enable on the Access Intranet item3.3.1 Managing QoS Quality of Service Bandwidth 3.3 Using the Traffic ManagerTo set up bandwidth priority To fill in the source IP or MAC, you can Change the order of upstream network packets that are sent to the Internet 3.3.2 Monitoring Traffic To use the parental control function 3.4 Setting up Parental Control3.5.1 Using AiDisk 3.5 Using the USB ApplicationTo use AiDisk 5. Click Finish to complete the setting Using Media Server 3.5.2 Using Servers Centerapplication Servers Center Media Servers tab. Refer to the Using Network Place Samba Share serviceTo use Samba share To delete an existing account To create a new accountTo add a folder 4. Click Apply to apply the changes Using the FTP Share serviceR/W Select this option to assign read/write access R Select this option to assign read-only accessTo use FTP Share service Device Name Miscellaneous settingTo configure Miscellaneous settings Maximum Login UserWork Group 3.5.3 3G/4GCharacter set on FTP Server To set up 3G/4G internet access To use AiCloud 3.6 Using AiCloudTo create a cloud disk 3.6.1 Cloud Disk2. Turn on Cloud Disk Page 3.6.2 Smart Access To use Smart Sync 3.6.3 Smart Sync3. Click Add new account 4.1.1 General 4 Configuring the Advanced Settings4.1 Wireless To configure the basic wireless settings40MHz Select this bandwidth to maximize the wireless throughput Off Disables WEP encryption 64-bit Enables weak WEP encryption Radius with128-bit Enables improved WEP encryption 10.When done, click Apply 4.1.2 WPS To enable WPS on your wireless network4. To set up WPS using the router’s WPS button, follow these steps 4.1.3 Bridge 6. On the Remote AP List, key in a MAC address and click the Add To set up the Wireless MAC filter 4.1.4 Wireless MAC FilterTo set up wireless RADIUS settings 4.1.5 RADIUS Setting4.1.6 Professional Multicast rate Mbps Select the multicast transmission rate or click Disable to switch off simultaneous single transmission 4.2.1 LAN IP 4.2 LAN4.2.2 DHCP Server To modify the LAN IP settingsTo configure the DHCP server 2. In the Enable the DHCP Server field, tick Yes5. In the IP Pool Ending Address field, key in the ending IP address or Delete To configure the LAN Routing table2. On the Enable static routes field, choose Yes 4.2.3 Route4.2.4 IPTV 4.3 WAN To configure the WAN connection settings4.3.1 Internet Connection Page Contact your ISP and update the MAC address associated with your ISP service 4.3.2 Port Trigger To set up Port TriggerWhen connecting to an IRC server, a client PC makes an outgoing connection using the trigger port range 66660-7000. The IRC server responds by verifying the username and creating a new connection to the client PC using an incoming port 4.3.3 Virtual Server/Port Forwarding To set up Port ForwardingPort Range If you want to specify a Port Range for clients on the same network, enter the Service Name, the Port Range e.g. 1020010300, the LAN IP address, and leave the Local Port empty. Port range accepts various formats such as Port Range 300350, individual ports 566,789 or Mix 10151024,3021 Differences between port trigger and port forwarding 4.3.4 DMZ To set up DMZTo remove DMZ 4.3.5 DDNS To set up DDNSEnable wildcard Enable wildcard if your DDNS service requires one 4.3.6 NAT Passthrough4.4 IPv6 To set up IPv64.5 VPN Server To set up access to a VPN server4.6.2 URL Filter To set up basic Firewall settings4.6 Firewall 4.6.1 GeneralTo set up a keyword filter To set up a URL filter4.6.3 Keyword filter 3. Enter a word or phrase and click the Add button 4. Click Apply 4.6.4 Network Services FilterTo set up a Network Service filter 4.7.1 Operation Mode 4.7 AdministrationTo set up the operating mode 4.7.2 System To set up the System settingsTo restore/save/upload wireless router settings 4.7.3 Firmware Upgrade4.7.4 Restore/Save/Upload Setting To upgrade the firmwareTo view your system log 4.8 System Log5.1 Device Discovery 5 UtilitiesTo launch the Device Discovery utility 5.2 Firmware Restoration To launch the rescue mode and use the Firmware Restoration utility5.3.1 ASUS EZ Printer Sharing 5.3 Setting up your printer serverTo set up the EZ Printer sharing mode 6. Click Finish to complete the installation 5. Wait a few minutes for the initial setup to finish. Click Next7. Follow the Windows OS instructions to install the printer driver 2. Select Add a local printer and then click Next 5.3.2 Using LPR to Share PrinterSharing your LPR printer To share your LPR printerPage 5. Select Custom then click Settings 7. Click Next to finish setting up the standard TCP/IP port 10. Click Finish to complete the installation 9. Click Next to accept the default name for the printerTo use Download Master 5.4 Download MasterTo configure BitTorrent download settings 5.4.1 Configuring Bit Torrent download settings5.4.2 NZB settings 6.1 Basic Troubleshooting 6 TroubleshootingUpgrade Firmware to the latest version 1. Turn off the modem 2. Unplug the modem Check if your network settings are correctRestart your network in the following sequence Check if your Ethernet cables are plugged properlyPage I cannot access the router GUI using a web browser 6.2 Frequently Asked Questions FAQsDHCP server has been disabled The client cannot establish a wireless connection with the routerOut of Range If you are using a wireless LAN adapter, check if the wireless channel in use conforms to the channels available in your country/area. If not, adjust the channel, channel bandwidth, and wireless mode Internet is not accessible Password You forgot the SSID network name or network passwordHow to restore the system to its default settings? Go to Administration Restore/Save/Upload Setting, and click RestoreFirmware upgrade failed 1. Click Start Internet Explorer to launch the browser Cannot access Web GUIA. Disable the proxy server, if enabled Windows 2. Click Tools Internet options Connections tab LAN settingsWindows 1. Click Start Control Panel Network and Internet SettingsB. Set the TCP/IP settings to automatically obtain an IP address MAC OSObtain an IPv6 address automatically To obtain the IPv6 IP settings automatically, tick2. Click System Preferences Network Configure MAC OS1. Click Start Internet Explorer to launch the browser C. Disable the dial-up connection, if enabled Windows3. Tick Never dial a connection 2. Click Tools Internet options Connections tabREACH ASUS Recycling/Takeback ServicesAppendices NoticesIncrease the separation between the equipment and receiver Prohibition of Co-locationagainst harmful interference in a residential installation Reorient or relocate the receiving antennaDeclaration of Conformity for R&TTE directive 1999/5/EC Safety InformationCE Mark Warning Radio Frequency RF Exposure Information Canada, Industry Canada IC NoticesCanada, avis d’Industry Canada IC GNU GENERAL PUBLIC LICENSE NCC 警語GNU General Public License Licensing informationPreamble Terms & conditions for copying, distribution, & modification Page In addition, mere aggregation of another work not based on the Program with the Program or with a work based on the Program on a volume of a storage or distribution medium does not bring the other work under the scope of this License cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or 6. Each time you redistribute the Program or any work based on the Program, the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License END OF TERMS AND CONDITIONS NO WARRANTYA.S Tel. No Address For Turkey onlyAuthorised distributors in Turkey BOGAZICI BIL GISAYAR SAN. VE TIC. A.S Tel. No AddressASUS COMPUTER GmbH Germany and Austria ASUS Contact informationASUSTeK COMPUTER INC. Asia Pacific ASUS COMPUTER INTERNATIONAL AmericaCountry Networks Global Hotline InformationRegion EuropeAsia-Pacific Americas Service HoursNetworks Global Hotline Information RegionTAIPEI 112, TAIWAN ManufacturerASUSTeK Computer Inc +886-2-2894-3447