NAT Passthrough | Asus RTAC68U guide

•Enable wildcard: Enable wildcard if your DDNS service requires one.

NOTES:

DDNS service will not work under these conditions:

•When the wireless router is using a private WAN IP address (192.168. x.x, 10.x.x.x, or 172.16.x.x), as indicated by a yellow text.

•The router may be on a network that uses multiple NAT tables.

4.3.6 NAT Passthrough

NAT Passthrough allows a Virtual Private Network (VPN) connection to pass through the router to the network clients. PPTP Passthrough, L2TP Passthrough, IPsec Passthrough and RTSP Passthrough are enabled by default.

To enable / disable the NAT Passthrough settings, go to the Advanced Settings > WAN > NAT Passthrough tab. When done, click Apply.

74

Image 74

Asus RTAC68U manual NAT Passthrough, Ddns service will not work under these conditions

Contents

RT-AC68U Copyright 2013 ASUSTeK Computer Inc. All Rights Reserved Table of contents Configuring the Advanced Settings Utilities 112 Package contents Welcome Your wireless router LAN 1~4 LED Specifications Positioning your router Setup Requirements To set up your wireless router via wired connection Router SetupWired connection Wireless connection To set up your wireless router via wireless connectionPage Logging into the Web GUI To log into the web GUI Log into the Web GUI. The QIS page launches automatically Quick Internet Setup QIS with Auto- detectionTo use QIS with auto-detection For Automatic IP Dhcp For PPPoE, PPTP, and L2TP For Static IP Auto-detection of your ISP connection type takes place whenPage Connecting to your wireless network To connect to your network Configuring the General settings Using the Network Map Setting up the wireless security settings To set up the wireless security settings To manage your network clients Key in your security passkey Click Apply when doneManaging your network clients From the navigation panel, go to General Network Map tab Monitoring your USB device To monitor your USB device Safely removing the USB disk To safely remove the USB disk To create a guest network Click EnableCreating a Guest Network From the navigation panel, go to General Guest Network Select an Authentication Method To configure additional options, click ModifyClick Yes on the Enable Guest Network screen Select Disable or Enable on the Access Intranet item To set up bandwidth priority Using the Traffic ManagerManaging QoS Quality of Service Bandwidth Enter all IP addresses as *.*.*.* or leave the field blank Page Monitoring Traffic To use the parental control function Setting up Parental ControlClick OK Click Apply to save the settings To use AiDisk Using the USB ApplicationUsing AiDisk Page Using Servers Center Using Media Server Following for the descriptions of the fields To launch the Media Server setting page, go to General USBApplication Servers Center Media Servers tab. Refer to To use Samba share Click to add new account Follow the steps below to add, delete, or modify an accountTo create a new account To delete an existing account Using the FTP Share service To use FTP Share service Maximum Login User To configure Miscellaneous settingsConfigure the following settings Device Name Character set on FTP Server 3 3G/4GWork Group To set up 3G/4G internet access Click Apply Using AiCloud To use AiCloud To create a cloud disk Insert a USB storage device into the wireless routerCloud Disk Turn on Cloud DiskPage Smart Access Click Add new account Smart SyncTo use Smart Sync Wireless GeneralPage Radius with To enable WPS on your wireless network 2 WPSPage Bridge Page Wireless MAC Filter To set up the Wireless MAC filter Radius Setting To set up wireless Radius settings Professional Page LAN LAN IP Enable the Dhcp Server field, tick Yes To modify the LAN IP settingsTo configure the Dhcp server Dhcp ServerPage Route To configure the LAN Routing tableOn the Enable static routes field, choose Yes On the Static Route List, enter the network information Iptv Internet Connection To configure the WAN connection settingsWAN Page Page To set up Port Trigger Port TriggerPage To set up Port Forwarding Virtual Server/Port ForwardingPage Local IP Key in the client’s LAN IP address Differences between port trigger and port forwarding To remove DMZ To set up DMZ4 DMZ To set up Ddns Ddns Ddns service will not work under these conditions NAT Passthrough Enter your IPv6 LAN and DNS settings Click Apply To set up IPv6From the navigation panel, go to Advanced Settings IPv6 IPv6 To set up access to a VPN server VPN Server URL Filter To set up basic Firewall settingsFirewall Keyword filter To set up a URL filterTo set up a keyword filter Network Services Filter Enter a word or phrase and click the Add button Click Apply To set up a Network Service filter To set up the operating mode AdministrationOperation Mode Select any of these operation modes Time Zone Select the time zone for your network To set up the System settingsSystem To upgrade the firmware Firmware UpgradeRestore/Save/Upload Setting To restore/save/upload wireless router settings To view your system log System LogSystem Log contains your recorded network activities From your computer’s desktop, click Device DiscoveryTo launch the Device Discovery utility Unplug the wireless router from the power source Firmware Restoration Specify a firmware file, then clickUpload Setting up your printer serverAsus EZ Printer Sharing To set up the EZ Printer sharing mode Page Page Select Add a local printer and then click Next Using LPR to Share PrinterTo share your LPR printer Page Select Custom then click Settings Click Next to finish setting up the standard TCP/IP port Page Download Master To use Download Master To configure BitTorrent download settings Configuring Bit Torrent download settingsUse the navigation panel to configure the advanced settings NZB settings Troubleshooting Basic Troubleshooting Restart your network in the following sequence 101 Frequently Asked Questions FAQs Cannot access the router GUI using a web browser Out of Range Move the router closer to the wireless clientDhcp server has been disabled 104 Internet is not accessible You forgot the Ssid network name or network password How to restore the system to its default settings? Firmware upgrade failed Click OK when done Cannot access Web GUIClick Tools Internet options Connections tab LAN settings Windows Click Start Control Panel Network and Internet SettingsCllick Apply Now when done Internet Protocol Version 6 TCP/IPv6, then click Properties Click the Apple icon located on the top left of your screen Disable the dial-up connection, if enabled Windows Tick Never dial a connection Asus Recycling/Takeback Services Federal Communications Commission Statement Against harmful interference in a residential installation Prohibition of Co-location CE Mark Warning Safety InformationDeclaration of Conformity for R&TTE directive 1999/5/EC Canada, avis d’Industry Canada IC Canada, Industry Canada IC NoticesRadio Frequency RF Exposure Information Cet appareil numérique de classe B est conforme aux normes Version 2, June NCC 警語GNU General Public License Preamble Terms & conditions for copying, distribution, & modification 119 Page Page Page 123 No Warranty Tel. No Address For Turkey onlyAuthorised distributors in Turkey Asus Computer International America Asus Contact informationASUSTeK Computer INC. Asia Pacific Networks Global Hotline Information Country Hotline Number 128 Europe Manufacturer ASUSTeK Computer Inc Tel +886-2-2894-3447Authorised Asus Computer GmbH Representative