Asus RTAC68U manual Local IP Key in the client’s LAN IP address

• Local IP: Key in the client’s LAN IP address.

NOTE: Use a static IP address for the local client to make port forwarding work properly. Refer to section 4.2 LAN for information.

•Local Port: Enter a specific port to receive forwarded packets. Leave this field blank if you want the incoming packets to be redirected to the specified port range.

•Protocol: Select the protocol. If you are unsure, select BOTH.

To check if Port Forwarding has been configured successfully:

•Ensure that your server or application is set up and running.

•You will need a client outside your LAN but has Internet access (referred to as “Internet client”). This client should not be connected to the ASUS router.

•On the Internet client, use the router’s WAN IP to access the server. If port forwarding has been successful, you should be able to access the files or applications.

Differences between port trigger and port forwarding:

•Port triggering will work even without setting up a specific LAN IP address. Unlike port forwarding, which requires a static LAN IP address, port triggering allows dynamic port forwarding using the router. Predetermined port ranges are configured to accept incoming connections for a limited period of time. Port triggering allows multiple computers to run applications that would normally require manually forwarding the same ports to each PC on the network.

•Port triggering is more secure than port forwarding since the incoming ports are not open all the time. They are opened only when an application is making an outgoing connection through the trigger port.

71