2-13ASUS TS100-E4/PI2
3. Secure the HDD to the cage with
two screws on both sides of the
cage.
4. Rei nstal l t he HDD cage to th e
chassis. Align the HDD cage and
bay assembly rails, then carefully
push the HDD cage until it is
ushed to the chassis.
5. Connect one end of the supplied
7-pin SATA cable to the SATA
connector at the back of the drive.
6. Connect the other end to a SATA
connector on the motherboard.
See page 3-6 for the location of
the SATA connectors.
5
6
7. Connect a 4-pin power plug from
the power supply unit to the
power connector at the back of
the drive.