Asus TS100-E4/PI2 2.6.2 Installing additional optical drive(s)

2-17ASUS TS100-E4/PI2
2.6.2 Installing additional optical drive(s)
1. Select the drive bay you intend
to use. Push the knock down
metal cover in and out of the
chassis until it is removed.
2. Carefully insert the drive to the
bay, then push it inward until it
is flushed to the chassis front
panel.
3. Align the optical drive and bay
screw holes.
4. Secure the drive with two screws
on both sides of the bay.
Screw holes
3 4
1
1
1
Congure your optical drive as Master/Slave device before installing it to
the drive bay. Refer to the optical drive documentation for details.
To install an additional optical drive(s):