Asus TS100-E4/PI2 4.4.7 Onboard Devices Conguration

4-26 Chapter 4: BIOS setup
BIOS SETUP UTILITY
Advanced
ENABLE: Allow
remapping of
overlapped PCI memory
abovethetotal
physical memory.
DISABLE: Do not allow
remapping of memory.
CongureWin83627EHG-ASuperIOChipset
SerialPort1Address [3F8/IRQ4]
SerialPort2Address [2F8/IRQ3]
 SerialPort2Mode [Normal]
ParallelPortAddress [378]
ParallelPortMode [ECP]
ECPModeDMAChannel [DMA3]
ParallelPortIRQ [IRQ7]
4.4.7 Onboard Devices Conguration
The Onboard Devices Conguration menu allows you to change the onboard
devices settings. Select an item then press <Enter> to display the sub-
menu.
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Conguration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4] [2E8/IRQ3]
Serial Port2 Address [2F8/IRQ3]
Allows you to select the Serial Port2 base address.
Conguration options: [Disabled] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Serial Port2 Mode [Normal]
Allows you to select the Serial Port2 mode.
Conguration options: [Normal] [IrDA] [ASK IR]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses.
Conguration options: [Disabled] [378] [278] [3BC]
Parallel Port Mode [ECP]
Allows you to select the Parallel Port mode.
Conguration options: [Normal] [Bi‑directional] [ECP] [EPP]
EPP Version [1.9]
Allows selection of the Parallel Port EPP version. This item appears
when the Parallel Port Mode is set to [EPP] or [ECP & EPP].
Conguration options: [1.9] [1.7]
ECP Mode DMA Channel [DMA3]
Appears when the Parallel Port Mode is set to [ECP] or [ECP & EPP]. This
item allows you to set the Parallel Port ECP DMA.
Conguration options: [DMA0] [DMA1] [DMA3]
Parallel Port IRQ [IRQ7]
Sets the Parallel port IRQ. Conguration options: [IRQ5] [IRQ7]