ASUS TS100-E4/PI2 4-21
Select Screen
Select Item
+- Change Option
F1 General Help
F10SaveandExit
ESCExit
v02.58(C)Copyright1985-2004,AmericanMegatrends,Inc.
BIOS SETUP UTILITY
Advanced
Select Remote Access
type.
CongureRemoteAccesstypeandparameters
RemoteAccess [Enabled]
Serialportnumber [COM1]
 BaseAddress,IRQ [3F8h,4]
SerialPortMode [1152008,n,1]
FlowControl [None]
RedirectionAfterBIOSPOST [Always]
TerminalType [ANSI]
VT-UTF8ComboKeySupport [Enabled]
MediaType [Serial]
4.4.3 Remote Access Conguration

Remote Access [Disabled]

Enables or disables the remote access feature.
Conguration options: [Disabled] [Enabled]
The following items appear only when the Remote Access item is set to
[Enabled].
The items in this menu allows you to congure the Remote Access fea-
tures. Select an item then press <Enter> to display the conguration
options.

Serial port number [COM1]

Allows you to select a serial port for console redirection. Conguration op-
tions: [COM1] [COM2]

Serial Port Mode [115200 8, n,1]

Allows you to select a serial port mode. Conguration options: [115200
8,n,1] [57600 8,n,1] [38400 8,n,1] [19200 8,n,1] [09600 8,n,1]

Flow Control [None]

Allows you to set the ow control for console redirection. Conguration
options: [None] [Hardware] [Software]

Redirection After BIOS POST [Always]

Sets the redirection mode after the BIOS Power-On Self-Test (POST). Some
operating systems may not work when this item is set to Always.
Conguration options: [Disabled] [Boot Loader] [Always]