viii

Safety information

Electrical Safety

• Before installing or removing signal cables, ensure that the power cables
for the system unit and all attached devices are unplugged.
• To prevent electrical shock hazard, disconnect the power cable from
the electrical outlet before relocating the system.
• When adding or removing any additional devices to or from the system,
ensure that the power cables for the devices are unplugged before the
signal ca bles are connected. If possi ble, disconn ect all power cab les
from the existing system before you add a device.
• If the power supply is broken, do not try to x it by yourself. Contact a
qualied service technician or your dealer.

Operation Safety

• Any mechanical operation on this server must be conducted by certied
or experienced engineers.
• Before operating the server, carefully read all the manuals included with
the server package.
• Before using the server, m ake sure all cables are correctly connected
and the power cables are not damaged. If any damage is detected, con-
tact your dealer as soon as possible.
• To avoid short circuits, keep paper clips, screws, and staples away from
connectors, slots, sockets and circuitry.
• Avoid dust, humidity, and temperature extremes. Place the server on a
stable surface.
This product is equipped with a three-wire power cable and plug for the
user’s safety. Use the power cable with a properly grounded electrical
outlet to avoid electrical shock.
Lithium-Ion Battery Warning
CAUTION! Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by
the man ufacturer. Dispose of us ed batte ries acc ording t o the
manufacturer’s instructions.
CD-ROM Drive Safety Warning

CLASS 1 LASER PRODUCT

Heavy System
CAUTION! This se rver syst em is heavy. Ask for assistanc e when
moving or carrying the system.