4-16 Chapter 4: BIOS setup

PIO Mode [Auto]

Selects the PIO mode. Conguration options: [Auto] [0] [1] [2] [3] [4]

DMA Mode [Auto]

Selects the DMA mode. Conguration options: [Auto] [SWDMA0] [SWD-
MA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1]
[UDMA2] [UDMA3] [UDMA4] [UDMA5]

SMART Monitoring [Auto]

Sets the Smart Monitoring, Analysis, and Reporting Technology. Congura-
tion options: [Auto] [Disabled] [Enabled]

32Bit Data Transfer [Enabled]

Enables or disables 32-bit data transfer.
Conguration options: [Disabled] [Enabled]

Congure SATA As [Standard IDE]

Sets the conguration for the Serial ATA connectors supported by the
Southbridge chip.
If you want to use the Serial ATA hard disk drives as Parallel ATA physical
storage devices, set this item to [Standard IDE].

Onboard IDE Operate Mode [Enhanced Mode]

4.3.5 IDE Conguration
The items in this menu allow you to set or change the congurations for
the IDE devices installed in the system. Select an item then press <Enter>
if you wish to congure the item.
IDEConguration
CongureSATAas [StandardIDE]
OnboardIDEOperateMode  [EnhancedMode]
EnhancedModeSupportOn [S-ATA]
IDEDetectTimeOut(Sec) [35]
Set[CompatibleMode]
when Legacy OS (i.e.
WINME,98,NT4.0,MS
DOS)is used.
Set[EnhancedMode]
when Native OS (i.e.
WIN2000, WIN XP) is
used.
Select Screen
Select Item
+- Change Option
F1 General Help
F10SaveandExit
ESCExit
BIOS SETUP UTILITY
Main
v02.58(C)Copyright1985-2004,AmericanMegatrends,Inc.