6.2.3Adding or viewing a RAID configuration
You can add a new RAID configuration or view an existing configuration using the View/Add Configuration command.
Adding a new RAID configuration
To add a new RAID configuration:
1.From the Management Menu, highlight Configure, then press <Enter>.
2.Use the arrow keys to select View/Add Configuration, then press <Enter>.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Configuration Menu
Easy Configuration
Management MenuNew Configuration
Configure View/Add Configuration
Initialize Clear Configuration
Objects Select Boot Drive
Rebuild
Check Consistency
View/Add to The Existing Configuration
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
3.The ARRAY SELECTION MENU displays the available drives connected to the SATA ports. Select the drive(s) you want to include in the RAID set, then press <SpaceBar>. When selected, the drive indicator changes from READY to ONLIN
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Easy Configuration - ARRAY SELECTION MENU
|
|
|
|
| PORT # | |
| Management Menu |
|
| |||
Configure |
| 0 | READY |
| ||
Initialize |
|
| ||||
Objects |
| 1 | READY |
| ||
Rebuild |
|
| ||||
Check Consistency |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Port # 0 DISK 77247MB HDS728080PLA380 PF20A60A
The information of the selected hard disk drive displays at the bottom of the screen.
ASUS |