5.4.4Onboard Device Configuration
BIOS SETUP UTILITY
Advanced
| Configure Win627EHF Super IO Chipset | Allows BIOS to Enable | |||
|
|
|
| or Disable Floppy | |
|
|
|
| ||
| Serial Port1 Address | [3F8/IRQ4] | Controller. | ||
| Serial Port2 Address | [2F8/IRQ3] |
|
| |
| Serial Port2 Mode | [Normal] |
|
| |
| OnBoard LAN1 Boot ROM | [Enabled] |
|
| |
| OnBoard LAN2 Boot ROM | [Enabled] |
|
| |
|
|
|
| ←→ | Select Screen |
|
|
|
| ↑↓ | Select Item |
|
|
|
| +- | Change Option |
|
|
|
| F1 | General Help |
|
|
|
| F10 | Save and Exit |
|
|
|
| ESC | Exit |
|
|
|
|
|
|
v02.61 (C)Copyright
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4] [2E8/IRQ3]
Serial Port2 Address [2F8/IRQ3]
Allows you to select the Serial Port2 base address.
Configuration options: [Disabled] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Serial Port2 Mode [Normal]
Allows you to select the mode for Serial Port2.
Configuration options: [Normal] [IrDA] [ASK IR]
IR I/O Pin Select [SINB/SOUTB]
This item appears only when you set the Serial Port2 Mode item to [IrDa] or [ASK IR] and allows you to select the receiver or transmit pin for Serial Port2. Configuration options: [SINB/SOUTB] [IRRX/IRTX]
IR Duplex Mode [Half Duplex]
This item appears only when you set the Serial Port2 Mode item to [IrDa] or [ASK IR] and allows you to select Full or Half Duplex for Serial Port2. Configuration options: [Full Duplex] [Half Duplex]
Onboard LAN1/2 Boot ROM [Enabled]
Allows you to do the LAN Boot ROM configuration.
Configuration options: [Disabled] [Enabled]
ASUS |