7.1.2Installing the RAID controller driver

Windows® Server OS

During Windows® Server OS installation

To install the RAID controller driver when installing Windows® Server OS:

1.Boot the computer using the Windows® Server installation CD. The Windows®

Server OS Setup starts.

Windows Setup

Press F6 if you need to install a third party SCSI or RAID driver...

2.Press <F6> when the message “Press F6 if you need to install a third party

SCSI or RAID driver...” appears at the bottom of the screen.

3.When prompted, press <S> to specify an additional device.

Windows Setup

Setup could not determine the type of one or more mass storage devices installed in your system, or you have chosen to manually specify an adapter. Currently, Setup will load support for the following mass storage devices(s):

<none>

*To specify additional SCSI adapters, CD-ROM drives, or special disk controllers for use with Windows, including those for which you have a device support disk from a mass storage device manufacturer, press S.

*If you do not have any device support disks from a mass storage device manufacturer, or do not want to specify additional mass storage devices for use with Windows, press ENTER.

S=Specify Additional Device

ENTER=Continue

F3=Exit

ASUS TS500-E5

7-5