2.7Expansion cards
The system is designed with an expansion card lock on the rear panel for you to install or remove an expansion card in less steps.
Ensure to unplug the power cord before installing or removing expansion cards. Failure to do so may cause severe damage to the motheboard and other system components!
2.7.1Installing an expansion card
1.Before installing the expansion card, read the documentation that came with it and make the necessary hardware settings for the card.
2.Lay the system on its side on a flat, stable surface.
3.Use a Phillips screw driver to remove the metal slot cover opposite the slot where you wish to install an expansion card.
4.Lift the expansion card lock.
5.Align the card golden fingers with the slot, and then press firmly until the card is completely seated on the slot.
Chapter 2: Hardware setup |