Asus TS500-E5 67

8.USB connectors (10-1 pin USB34, USB56)

These connectors is for USB 2.0 ports. Connect the USB module cable to the connectors, then install the module to a slot opening at the back of the system chassis. The USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed.

DSAN-DX/TS500-E5

	USB56				USB34
NC				NC
NC				NC
GND			GND	GND			GND
USB_P6+			USB_P5+	USB_P4+			USB_P3+
USB_P6+			USB_P5+	USB_P4+			USB_P3+
USB_P6-			USB_P5-	USB_P4-			USB_P3-
USB+5V			USB+5V	USB+5V			USB+5V

		PIN 1				PIN 1

DSAN-DX/TS500-E5

USB 2.0 connectors

The USB port module is purchased separately.

9.CPU and system fan connectors (4-pin CPU_FAN1/2, REAR_FAN1/2, FRNT_FAN1/2/3/4)

The fan connectors support cooling fans of 350 mA–740 mA (8.88 W max.) or a total of 3.15 A–6.66 A (53.28 W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector.

DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors!

CPU_FAN1

REAR_FAN2

CPU_FAN2

E5-DX/TS500 FRNT_FAN2