Asus TUSL2 OC3, KBPWR, Setting, Setting, ASUS TUSL2 User’s Manual, 5)USB/CNR Selection (OC3), 6)Keyboard Power Up (KBPWR), [1-2], [2-3], Enable, Disable, Enable CNR

3.HARDWARE SETUP

5)USB/CNR Selection (OC3)

This jumper switches the circuit power between the USB23 connector and the CNR slot. Note that the default is set to power the USB23 connector.

Setting	OC3
Enable CNR	[1-2]
Enable USB23	[2-3] (default)

COM1

TUSL2

OC3

1	2	2	3
USB on CNR		USB23
		(Default)

TUSL2 USB/CNR Selection

6)Keyboard Power Up (KBPWR)

This allows you to disable or enable the keyboard power up function. Set this jumper to Enable if you wish to use your keyboard (by pressing <Spacebar>) to power up your computer. This feature requires an ATX power supply that can supply at least 300mA on the +5VSB lead. The default is set to Disable because not all computers have the appropriate ATX power supply. Your computer will not power ON if you set this to Enable but do not have the appropriate ATX power supply. NOTE: This jumper must be set in conjunction with Wake On PS2 KB/ PS2 Mouse/CIR in 4.5.1 Power Up Control.

Setting	KBPWR
Enable	[1-2] (default)
Disable	[2-3]
COM1	KBPWR
		3
	2	2
	1
	Enable	Disable

TUSL2

TUSL2 Keyboard Power Setting

ASUS TUSL2 User’s Manual 21