Asus TUSL2 NOTE:, NOTE:, CPU Speed, Advanced Menu, 4.4 Advanced Menu, CPU Core:Bus Freq. Multiple, 7)CPU External Frequency Setting (DSW)

3.HARDWARE SETUP

7)CPU External Frequency Setting (DSW)

This option tells the clock generator what frequency to send to the CPU, DRAM, AGP, and the PCI bus. This allows the selection of the CPU’s External fre- quency.

IMPORTANT:

1.In JumperFree mode, all dip switches must be set to OFF.

2.When JumperFree mode is enabled, use BIOS setup in place of these switches (see CPU Speed in Advanced Menu in BIOS Setup).

NOTE: Only selected switches are illustrated. For a complete frequency listing, see next page.

SETUP H/W .3

Settings Motherboard

COM1

TUSL2

DSW

	5		5		5		5
	4		4		4		4
	3		3		3		3
ON	1 2	ON	1 2	ON	1 2	ON	1 2

CPU	66.8MHz			100.3MHz			103.0MHz			133.70MHz
DRAM	100.2MHz			100.3MHz			103.0MHz			100.30MHz
AGP	66.8MHz				66.8MHz			68.7MHz		66.85MHz
			5			5			5			5
			4						4
						4						4
			3			3			3			3
		ON	1 2		ON	1 2		ON	1 2		ON	1 2

TUSL2 CPU External	CPU	140MHz	133.70MHz	140MHz (JumperFree Mode)
	DRAM	105MHz	133.70MHz	140MHz
Clock (BUS) Frequency AGP		70MHz	66.85MHz	70MHz

Selection

NOTE: If your processor does not have a locked Frequency Multiple, you must use CPU Core:Bus Freq. Multiple in 4.4 Advanced Menu to set the Frequency Multiple. If the Frequency Multiple is locked, setting the Frequency Multiple in BIOS setup will have no effect.

22 ASUS TUSL2 User’s Manual