Asus TUSL2 18)Chassis Intrusion Lead (2-pinACHA), 17)ASUS iPanel Audio Connector (12-1pin AAPANEL)

3.HARDWARE SETUP

17)ASUS iPanel Audio Connector (12-1 pin AAPANEL)

Connect the audio cable from the optional ASUS iPanel to this for front panel audio control.

COM1

TUSL2

AAPANEL

R in Line	AGND2	L in Line	AGND	MIC2
R out Line	AGND3	L out Line		MICPWR

TUSL2 Audio Panel Connectors

.3

H/WConnectors

SETUP

18)Chassis Intrusion Lead (2-pin ACHA)

This lead is for a chassis designed for chassis intrusion detection. After-market toggle switches may also be installed to the chassis panel or on any removable components. Two wires should be available from the chassis to connect to this lead. When any chassis component is removed, the contact should open and the motherboard will record a chassis intrusion event. (The event can then be processed by software such as LDCM.) If the chassis intrusion lead is not used, a jumper cap must be placed over the pins to close the circuit.

COM1

ACHA

TUSL2

TUSL2 Chassis Open Alarm Lead

40 ASUS TUSL2 User’s Manual