SETUP H/W .3

Settings Motherboard

3.HARDWARE SETUP

8)Voltage I/O Setting (VIO)

This jumper allows you to select the voltage supplied to the DRAM, chipset, AGP, and PCI. The default setting of 3.40V should be used unless processor overclocking requires a higher voltage.

Setting VIO

3.30V [1-2]

3.40 V

[2-3] (default)

 

 

3.60 V

[3-4]

 

 

COM1

 

VIO

 

 

 

 

4

 

 

3

3

 

2

2

 

 

1

 

 

 

3.30 V

3.40 V

3.60 V

(Default)

TUSL2

TUSL2 VIO Setting

WARNING! Using a higher voltage may help when overclocking but may result in the shortening of your computer component’s life. It is highly recommended that you leave this setting on its default.

9)Bass Center Setting (CENTER/BASS, BASS/CENTER)

Use these jumpers in conjunction with the C-Media PCI Audio Driver and to adjust output for 6 speaker audio. No audio standard exists for the three pick-up surfaces on male audio jacks, therefore it may be necessary to switch jumpers from the default position, type 1, to type 2, in order to help reroute signals among the internal leads in the Line-In, Line-Out, Mic female sockets. Make sure a test is made using the C-Media Audio Driver software setup available on the Support CD.

COM1

 

BCS

 

2

1

3

2

type 1 Bass

type 2

Bass

(CENTER/BASS)

(BASS/CENTER)

TUSL2

 

(Default)

 

 

TUSL2 Bass Center Setting

24

ASUS TUSL2 User’s Manual