AT&T 1465 user manual Changing feature options, Feature options

91-5624-40-00-ATT1465CIB.qxd 5/20/2004 4:08 PM Page 29

1 MENU

Press until desired feature is heard(see list at right)

2 CHANGE

Press until desired selection is heard

3 MENU

Press to set selection and move to next menu option

Or

PLAY/STOP

Press to set selection and exit menu

Answering System Operation

Changing feature options

Menu features can be changed to customize how the answering system operates. Press MENU repeatedly to hear each feature. Press CHANGE when you hear the feature you want to modify.

Feature options	(Default settings underlined)
System announces:	Feature description:
“Change announcement”	Record your outgoing announcement
Options: [record announcement]	(see page 27).
“Change remote access code”	Enter a 2-digit number (10-99) for remote
Options: [enter 2-digit code] 19	access from another phone (see page 33).
“Change message alert”	When on, the telephone beeps every 10
Options: On / Off	seconds when you have new messages.
“Change announce only”	When on, callers hear an announcement
Options: On / Off	but cannot leave messages (see page 28).
“Change base ringer”	When on, the base will ring to signal an
Options: On / Off	incoming call.
“Change number of rings”	Choose number of rings before the system
Options: 2 / 4 / 6 /Toll Saver	answers a call. When Toll Saver is active,
	the system answers after 2 rings if you
	have new messages, and after 4 rings if
	you have no new messages.

NOTE: Press CHANGE to advance the remote access code number by one digit at a time. Press and hold to advance by 10 digits at a time.

29