30
Answering System Operation
Message playback
Press the PLAY/STOP button to hear incoming messages
you’ve received. The system announces the number of
messages, then begins playback.
If you have new messages waiting, you will hear only the
new messages (oldest first). If there are no new messages,
the system will play back all messages (oldest first).
Announcements
• When playback begins, you will hear the number of
messages.
• Before each message, you will hear the day and time
it was received.
• After the last message, you will hear “End of mes-
sages.” If the system has less than 5 minutes of
recording time left, you will hear time remaining.
Options during playback
• Press ^V to adjust speaker volume.
• Press }to skip to next message (or hold down to
speed up message playback).
• Press {to repeat message currently playing. Press
twice to hear previous message. (Hold down to slow
message playback).
• Press DELETE to delete message being played back.
• Press PLAY/STOP to stop playback.
To delete all messages
To delete all messages, press and hold the DELETE
button while the phone is idle (not during a call, or
during message playback). This will delete all old
messages. New messages (ones you have not yet played
back) will not be deleted.
1PLAY/STOP
“You have [xx] new
messages and [xx] old
messages”
Number of messages waiting
(or, during playback, message
number currently playing)
16
Message playback begins. See
options at right.
2PLAY/STOP
Message playback ends.
NOTE:
If “F” is flashing in
the message window, memory is
full. You will have to delete some
messages before new ones can
be received.
NOTE:
New (unheard)
messages cannot be deleted.
91-5624-40-00-ATT1465CIB.qxd 5/20/2004 4:08 PM Page 30