7
Getting Started
Battery installation & charging

After installation, place the handset in the base and allow the battery to charge for 12

hours before use. You can keep the battery charged by returning the handset to the base

after each use. When battery power is fully depleted, a full recharge takes about 8 hours.

Plug in battery here
Charging lightwill be illuminated
while battery is charging.
Low battery indicator
Return handset to base to recharge
when this symbol appears. (Handset
will beep when battery is low.)
Rotate antenna
to fully upright
position

NEW 00 OLD 27

0 8/12 10:06 AM
Place handset in base to charge for 12 hours
before first use.
Press coin into slot on
base of handset to
release latch, then
remove cover
To replace cover:
1Insert tabs at top of
cover into slots on base
2Align tab at bottom of
cover with slot in base,
then press to click in
place
91-5624-40-00-ATT1465CIB.qxd 5/20/2004 4:08 PM Page 7