16
Directory Dialing
Speed dialing
Numbers called most frequently can be stored in memory
locations 1-9 and dialed with only two button presses.
You can enter 9 Speed Dial numbers up to 24 digits
long. Each number is stored in a one-digit memory
location (1-9).
To enter a Speed Dial number
1 Press PROG to begin programming.
2 Press ^ to display
SPEED DIAL
.
3 Press SELECT.
4 Press dial pad to choose memory location (1-9).
5 Enter a name (up to 15 characters), then press
SELECT.
6 Enter a telephone number (up to 24 digits), then
press SELECT.
7 Choose distinctive ringing (yes or no).
8 Press PROG or SELECT to store the number. You
will hear a confirmation tone.
To call a Speed Dial number
To use speed dialing, press and hold a dial pad button
(1-9) to display the number and name stored in that
speed-dial location, then press PHONE to dial the
number.
NOTE:
To view another Speed Dial number, Press" OFF ". Follow the
instruction" To call a Speed Dial Number " to display another Speed Dial number.
1PROG
DIRECTORY
2^
SPEED DIAL
3SELECT
ENTER 1-9
ENTER NAME
01
(See Steps 3-7 on next
page.)
To change or delete a Speed Dial number
Press and hold a dial pad button (1-9) to display the
entry you want. Press SELECT, then press ^until
the option you want is displayed (see page 19).
91-5624-40-00-ATT1465CIB.qxd 5/20/2004 4:08 PM Page 16