9
2 Connect the power cord.
• Plug the smaller end of the power cord into the jack labeled 9VACon the back
of the system.
• Plug the other end of the power cord into an electrical outlet not controlled by
a wall switch.
NOTE: For table installation only,flip out the bracket under the unit, and fit the power
cord through the strain-relief tab.
Use only the power cord supplied with your answering system. If you need a
replacement cord,call 1 800 222–3111.
Input:120V,60 Hz
Output:9V AC, 400 mA
Wall Installation1Choose a location near a modular telephone jack and a standard electrical outlet
not controlled by a wall switch.
INSTALLATION
1782_book_1AT&T 5/1/00 7:35 PM Page 9