ANSWERING SYSTEM OPERATION

Answering Calls

When the system answers a call, the caller hears the announcement you recorded followed by a beep. After the beep, the system begins recording your caller’s message, up to three minutes long. If the message is longer than three minutes, or if the caller is silent for more than seven seconds, or if the system runs out of memory, the system beeps once and hangs up.

Turning the System On and Off

The L1 and L2 lights indicate which lines the system is set to answer. To choose which line(s) the system will answer, or to turn the system off, press Orepeatedly. This turns the lines on and off in the following order: Line 1 only; Line 2 only; Both lines on; Entire system off.

NOTE: When Answering System is turned off, no answering system or Call Match features can be used.

Volume Control

Press Vto increase the volume, or vto decrease volume. The eight volume settings are 0 (off) to 7. The default setting is 5. The system beeps to let you know you’ve reached the highest or lowest volume setting.

If you set the volume to 0 and then press Pto play back messages, the volume is reset to 2.

Call Screening/Intercept

Set the system to answer calls, and set the volume control so you can hear the caller’s message. (If you set the volume to 0, you will be unable to hear callers.)

If you decide to take the call, pick up any phone on the same line as the incoming call. If you pick up the phone during the announcement and the announcement does not stop right away, press and release the telephone switchhook, or press Pon the system.

Announcement Bypass

You might want to let frequent callers know they can press #on a touch tone phone when they hear your announcement begin. The system then stops playing your announcement and beeps so the caller can immediately begin recording a message.

30

Page 32 Page 34
Page 33
Image 33
AT&T 1782 user manual Answering System Operation
Page 32 Page 34

1782 specifications

AT&T 1782 is a significant telecommunications switch that was deployed primarily in the late 20th century, forming an integral part of the phone network infrastructure. This technology played a crucial role in the transition from analog to digital telephony, enhancing the efficiency and reliability of communication services. The AT&T 1782 switch utilized a digital processing architecture, allowing for improved call handling capabilities and a reduction in operational costs.

One of the main features of the AT&T 1782 is its ability to support a high volume of simultaneous calls. With a digital switching capacity, it could handle numerous lines and connections without the performance degradation often seen in older analog systems. This scalability made it an attractive option for many service providers looking to expand their networks while maintaining low latency calls.

In terms of technology, the AT&T 1782 was based on time division multiplexing (TDM), a technique that divides the available bandwidth of a communication medium into time slots. This method allowed multiple signals to share the same transmission medium efficiently, ensuring optimal utilization of resources. The digital nature of the switch also facilitated easier integration with emerging technologies, paving the way for more advanced telecommunication services such as data transmission and multimedia communication.

Another characteristic of the AT&T 1782 switch was its reliability. The design emphasized redundancy and fault tolerance, which minimized downtime and improved service quality. This reliability made the switch suitable for various applications, from residential telephony to larger corporate communications.

The AT&T 1782 also supported advanced features like call routing, billing services, and maintenance monitoring. Service providers could implement these functionalities easily, allowing for personalized customer services and more efficient network management.

Overall, the AT&T 1782 embodies a critical advancement in telecommunication technology, providing the backbone for many service providers during a transformative time in the industry. Its combination of high capacity, digital processing, and reliability positioned it as a preferred choice for many communications networks, influencing how calls and data were managed for years to come.
Top Page Image Contents