AT&T 1782 user manual Making a Display Dial Call, Display Dial Options

CALLER ID OPERATION

Display Dial

NOTE: You must have a phone attached to the unit (see INSTALLATION) and you must lift the receiver for this feature to work.

As you review calls in call history, you can dial a displayed phone number. If the call information came from your Home Area Code (the one you programmed during Installation), the screen displays only the seven-digit number you are calling (without an area code). When you use Display Dial, the system dials the seven displayed digits. If the call information came from outside your Home Area Code, the screen displays the seven- digit number plus the area code. When you use Display Dial, the system dials the 10 displayed digits, plus the digit “1” when appropriate. (See “Home Area Code and Local Area Code Guidelines” in SET UP SYSTEM FEATURES.)

Making a Display Dial Call

1Press Cor cto locate the number in the call history that you want to dial.

2Lift the receiver of the phone connected to the system.

3Press d. The screen displays the name and number being dialed, but you won’t hear the number being dialed. (If you don’t lift the receiver before pressing d, the system will not dial the number. Instead the screen displays Lift Receiver. You will need to repeat Steps 1 through 3.)

NOTE: If there is no number on the screen or the screen displayed Err, no number can be dialed.

Display Dial Options

Use this feature if you need to check or change the way a number in call history is dialed.

1Press Cor cto locate the number you want to call.

42