T E L E P H O N E M E M O R Y
Light is on when phone line is in use.
When light goes on, battery needs to be replaced.
Access telephone
Store a pause in asubscriber services. memory dialing
number.
| Put caller on Hold. | |
Dial numbers in | (Light goes on when | |
call is on Hold.) | ||
telephone memory. | ||
| ||
Store numbers in | Mute handset | |
microphone. | ||
telephone memory. | ||
| ||
| Redial last | |
| number called. | |
Temporary Tone | Adjust listening volume | |
| during a call. |
The telephone can store 9 telephone numbers, each up to 24 digits long. A number remains stored in memory unless you change it by storing a new number in its place.
NOTE: You may choose to store emergency numbers in memory locations. This feature is provided only as a convenience and the manufacturer assumes no responsibility for customer reliance upon the memory feature.
Storing Memory Numbers
1Press and release G.
2Enter a telephone number (up to 24 digits). To store a switchhook flash, press Fin the appropriate place while entering the number. To store a dialing pause, press pin the appropriate place while entering the number.
3Press and release Y.
4Press and release the memory location (1 to 9) where the number is to be stored. You cannot use 0, #or * as memory locations.
Dialing Memory Numbers
1Lift the handset.
2Press and release Y.
3Press and release the memory location (1 to 9).
Storing Numbers Just Dialed
1Press and release G.
2Press and release R.
3Press and release Y.
4Press and release the memory location (1 to 9) where the number is to be stored.
