R E M O T E
Changing Your Remote Access Code
1Connect with the answering system.
2Press and release 9, 9. The system announces “Enter new code.”
3Enter your new Remote Access Code (any number between 500 and 999 except for the Priority Calling Code).
4If a valid code is entered, the system announces the new Remote Access Code. If an invalid code is entered, the system beeps five times rapidly, then beeps twice. Repeat Steps 2 and 3.
Turn System Off
1Connect with the answering system.
2Press 8, 8, then hang up.
Turn System On
When the system is off, it answers after 10 rings and beeps twice.
1Press 0to turn the system on.
2The system beeps twice and is ready to answer calls and record messages. If the system beeps five times, the memory is full.
O P E R A T I O N
Memory Full
If the system answers after 10 rings and beeps twice instead of playing your announcement, the system is off, memory is full, or the AO announcement is selected but not recorded.
1Enter your Remote Access Code after the
2Listen to messages, and delete some or all of them.
3Press 7, 1to check your announcement. If you hear no announcement, press 7, *to record a new announcement.
4Press 0to make sure your system is on before you hang up.
Voice Help Menu
The Voice Help Menu allows you to use several system features from a remote location even when you cannot remember the touch tone commands. All you need to know is your Remote Access Code, and the system will prompt you. As soon as you hear the command you need, press the appropriate buttons.
11
