AT&T 1854 Wall Installation, Setting the Clock, Selectable Dial Information, Wrap the line cord

I N S T A L L A T I O N

Dial Mode Switch

Modular Jack

Standard AC Outlet

TEL LINE jack

Reset Button

Power Cord

Telephone Line Cord

WALL INSTALLATION

1Wrap the line cord.

Wrap the line cord around the posts on the inside of the base. Leave at least 3 inches free at each end of the line cord.

2Attach the base.

Turn the base so that the larger end of the base is toward the bottom of the telephone. Attach the base by inserting the tabs into the slots. Push down on the large end of the base to lock it into place.

3Connect the line cord to the telephone. Plug one end of the line cord into the jack labeled TEL LINE on the bottom of the phone.

4Reverse the handset tab.

Hold down the switchhook, and slide the tab up and out of its slot. Turn the tab so that the end with the hook is up. Then insert the tab back into its slot.

5Connect the line cord to modular jack and mount the phone on the wall jack.

Plug the free end of the line cord into a modular wall jack. Make sure the cord snaps firmly into place. Place the phone on the wall jack mounting studs and pull down until it is securely held.

6Connect the handset to the telephone. Plug the coiled cord into the handset jack on the side of the phone. Plug the other end of the cord into the handset, then hang up.

7Connect the power cord.

Use only the power cord supplied

!with your system. If you need a replacement cord, call 1 800 722-9125.

8Wait for the system to initialize. When the system is connected to AC power, all the indicator lights flash on and off. The Message Window counts down from eight to zero.

After the system reaches zero, you can complete installation by following instructions in "Setting the Clock."

SETTING THE CLOCK

1Press C. The time is displayed.

2Use the keypad to enter the time.

3Press *for AM or #for PM.

4Press C. The date is displayed.

5Use the keypad to enter the date (for example, press 707for July 7).

6Press C. The year is displayed.

7Use the keypad to enter the year.

8Press C. The system announces the date and time.

SELECTABLE DIAL INFORMATION

This telephone has a push button dial which will work with tone or dial pulse (rotary) service. Even when set to dial pulse service, the phone can be switched temporarily to tone, for access to services that require tone signaling, including some tone-activated computer systems.