AT&T VOICEMAIL MANAGER 200 USEFUL INFORMATION
Below you can find useful information while using your AT&T VoiceMail Manager 200.
1.AT&T Message Screening is activated by pressing the VM SCREENING key. (The green light next to the VM SCREENING key will illuminate.) The VM200 will answer incoming calls after the 3rd ring and then connect the incoming call to your AT&T VoiceMail box, allowing you to listen as the caller leaves a message. If you wish to speak to the caller, you may simply pick up the handset of your telephone while the caller is leaving the message. To turn the AT&T Message Screening off, press the VM SCREENING key and the VM SCREENING light will turn off.
2.You can retrieve your AT&T VoiceMail messages by pressing the DIAL VM key; however, you will need to pick up the handset of the attached phone to enter your password and interact with the AT&T VoiceMail system. (See page 11- to program your VM200 to enter your password, which will enable you to use the VM200’s AT&T VOICEMAIL FUNCTION KEYS to manage your messages as you listen to them through the VM200 speaker.)
If you disconnect your AT&T VoiceMail service please remember to either disable Message Screening or unplug your AT&T VoiceMail Manager 200. If you don’t do this, the VM200 will continue to initiate a
22
