AT&T 200 manual WALL-MOUNTING Your AT&T Voicemail Manager

WALL-MOUNTING YOUR AT&T VOICEMAIL MANAGER 200

To save desk space and facilitate ease of use, your AT&T VoiceMail Manager 200 can be mounted on the wall. Use the template on the following page and two (2) one- inch-long #6 screws.

☞Select a location that is near your telephone jack and a power outlet. We recommend a location that enables optimal viewing from the position you will most frequently be checking the display of your unit. For example, if you will be reading the display while you are at your desk or using your computer, position the AT&T VoiceMail Manager 200 so that you can easily see it when you are seated.

1.Hold the template against the wall where you wish to mount the AT&T VoiceMail Manager 200, and use a pencil to mark the position of the two screw holes.

2.Start the screw holes by lightly tapping a nail into your pencil marks. Remove the nail and insert the screws into the holes. Leave one-eighth of an inch (1/8”) clearance between the wall and the heads of the screws.

3.Mount the AT&T VoiceMail Manager 200 on the wall by aligning the holes in the base of the unit (on the bottom near the power and line jacks), with the screws on the wall. Slide the unit down until it locks into place.

31