AT&T 200 manual

PICK UP THE PHONE - The AT&T VoiceMail Manager is not a speakerphone device. This message reminds you to pick up the handset of your telephone to complete a call when you are speed dialing a number from the Call Log.

PLUG IN THE PHONE LINE - This message will be displayed if the initialization fails because the AT&T VoiceMail Manager 200 cannot detect a phone line connected to it. Check your connections and make sure the line is free.

PRIVATE -This indicates that the person calling you has requested that the telephone company block their number from being recognized by any Caller ID unit.

SWAP PHONE AND LINE - This message will be displayed if the initialization fails because the line from the wall jack and the line to the telephone are connected to the wrong ports on the AT&T VoiceMail Manager 200. Disconnect the power cord and swap the lines. Reconnect the power to restart the initialization.

UNAVAILABLE - The call came from an area that does not support Caller ID service.

UNKNOWN NUMBER - When you are reviewing your Calls, this message indicates that the AT&T VoiceMail Manager 200 was unable to retrieve the telephone number of the caller. This does not indicate that your AT&T VoiceMail Manager 200 is damaged.

26