STEP 4: Configure the PCI adapter for your wireless network
To configure the PCI adapter for communication with your wireless network, use the Configuration Wizard.To start the Configuration Wizard,
Wizard screen 1
SSID: Enter the SSID (Service Set Identifier) used by your wireless router or access point.The default SSID is at&t.You should change this to another name.The SSID is case sensitive (i.e.,“cat” and “Cat” are not the same). All wireless adapters on your network must use the same SSID as your wireless router and/or access point.
WEP: WEP is a form of encryption. If you click On to enable encryption in your wireless adapter, you must turn on WEP in your router, and make sure all devices use the same settings.
CAUTION: SSID and all WEP settings must be identi- cal in all wireless network devices. WEP Ascii/Hex Key must match the WEP settings used in your router (may be called Security Phrase , Hex Key or other term).
Click Apply to save your settings and display Wizard screen 2 (see next page).
AT&T Plug&Share™ Wireless PCI Adapter 22 Mbps Turbo 6500B4X
Enter up to 32 letters or numbers
5