Select Ring
To select a personalized 1Press [ Feature ], then [ * ] (leave handset on cradle)
ring pattern ●Green light flutters intermittently
●Voice terminal plays current ring pattern
2Adjust the ringer volume with the sliding ringer
control on back of voice terminal if desired
3Press [ * ] again to hear the next ring pattern
Note: There are 8 different patterns; cycle repeats
after the last pattern.
4Press [ Feature ] when you hear the desired ring pattern
●Your new ring is set; selection process ends
Note: If you receive a call, go off-hook, or lose power
during selection, the process is interrupted and you
must start again.
Send All Calls
To send all calls (except 1Press [ Feature ], then the Send All Calls entry number
priority calls) immediately
[dial tone]
to coverage or Dial Send All Calls code [confirmation tone]
Note: When a call comes to your extension,
call activity light will flutter and you may hear
a ring-ping tone indicating that the call has been sent
to coverage.
To cancel Send All Calls 1Press [ Feature ], then the Send All Calls
entry number again [dial tone]
or Dial Send All Calls Cancel code
[confirmation tone]
16