| Troubleshooting | |
|
| |
Problem | Solution | |
A feature doesn’t | 1 Reread the procedure and try again. | |
work as noted in | 2 For many features you must lift the handset before you can | |
the book. | ||
use the feature. | ||
| ||
| 3 Check with your System Manager to be sure this feature | |
| is administered on your voice terminal. | |
| 4 You may have an older version of the System 75 software | |
| so that some features may have slight differences from the | |
| procedures described in this guide. Check the section | |
| below on "Version Notes" for ways in which these | |
| features work differently. | |
|
| |
There are no | See your System Manager for a list of Feature Codes for | |
Feature Codes | features assigned to your voice terminal. Then, write the | |
(such as Call | codes in this guide. | |
Forward code or |
| |
Send All Calls |
| |
code) written in |
| |
the appropriate |
| |
blanks in this |
| |
guide. |
| |
|
|
Problem |
| Solution |
|
|
|
There’s no dial | 1 | Check with your System Manager to be sure your voice |
tone. |
| terminal is administered correctly. |
| 2 | Make sure that the handset and line cords at your voice |
|
| terminal are securely connected at both ends. |
| 3 | Find a working voice terminal of the same type as your |
|
| own. Unplug this voice terminal from its modular wall |
|
| jack. Plug your voice terminal into that jack and check |
|
| if it gets dial tone. |
| 4 | If your voice terminal still does not work, plug the |
|
| working voice terminal (of the same type) into your |
|
| modular wall jack. If the working voice terminal has |
|
| dial tone, your own voice terminal is faulty. See your |
|
| System Manager. |
|
|
|
20
