957_book_2ATT ill at margins 11/16/00 1:39 PM Page 4
INSTALLATION
Table/Desk Installation
1(Optional) You can adjust how much the phone tilts by pushing outward with your thumbs on the recessed “feet.” Push the feet out from the inside of the base, until they snap into place. If a foot comes out, align the arrow on the foot with the arrow on the base, and squeeze the foot back in from the inside of the base.
2Set the dial mode.
This phone comes set for touch tone dialing (TT). If you have dial pulse (rotary) service, set the swich on the underside of the phone to DP.
3Attach the base to the telephone.
Turn the base so that the smaller end is toward the bottom of the telephone, then attach.
4Connect the line cord to the telephone.
5Thread the power cord through the
(Make sure the plug is vertically oriented.)
Use only the power cord supplied with this product. If you need a replacement, call 1 800
4
