9
Set Local Area Codes
You can program up to four local area codes.
If for You dial Enter in Step 2
All calls outside 11 digits No local area codes
your area code (1+ area code + phone number)
Some calls outside 10 digits Area codes that do
your area code (area code + phone number) not require a “1”
If you dial 10 digits (area code plus phone number) for calls within your own area
code,include your area code as a local area code.
1Press and release Ountil the screen displays:
2Use the keypad to enter the three digits of the first local area code.
The screen prompts you for the next local area code (LAC2–,
LAC3–,LAC4–).
3Press Owhen you are finished.
Set Contrast
Adjust screen lighting to a comfortable level,from 1 (light) to 4 (dark).
1Press and release Nuntil the screen displays SET CONTRAST.
2Press CALL LIST +or CALL LIST -until the screen displays the
contrast level you prefer.
3Press N.
Set Time/Date
NOTE: The time/date are automatically reset each time new call
information is received. Incorrect time/date will be corrected with next
incoming call.
1Press and release O. The screen displays ENTER TIME?.
2Use the numbers on the keypad to enter the time. Press +to
select AM;press -to select PM (the screen may not display PM
until you have finished setting the time).
3Use the numbers on the keypad to enter the date. For example,
press 0605 to enter June 5. (Zeroes are not displayed.)
4Press Oto move to the next feature
— OR —
Wait 30 seconds for the phone to return to standby.
LAC1-___
LOCL AREA CODE?
FEATURE SETTINGS
957_book_2ATT ill at margins 11/16/00 1:39 PM Page 9