Telephone operation
Handset operation
Speakerphone
During a call, press SPEAKER to switch between
speakerphone and normal handset use. Press | OFF/CLEAR SPEAKER 0:00:30 |
to hang up. |
|
NOTES:
1.If you use the speakerphone during LOW BATTERY mode, the handset is not lit except for the 
SPEAKER button.
2.The speakerphone uses more power than the normal handset. If the handset battery becomes very low while you are using the speakerphone, the call remains in speakerphone mode until you hang up or the battery becomes depleted. When the battery is very low, you cannot switch a call from normal handset use to speakerphone mode.
3.After installing the battery into the handset, the screen may show LOW BATTERY. If you use speakerphone at this time, the battery may become depleted. Follow the instructions in the Battery installation & charging section on pages
Last number redial
To view the five most recently dialed numbers:
•To display the most recently called number (up to 30 digits), press REDIAL/PAUSE.
•To view up to five recently called numbers, press
REDIAL/PAUSE then qCID or DIRp, or press REDIAL/PAUSE repeatedly.
REDIAL
The handset beeps twice at the beginning and at the end of the list.
Press 
OFF/CLEAR to exit. To redial a number:
•To dial the displayed number, press 
PHONE/FLASH or 
SPEAKER.
•You can call the most recently called number by pressing
PHONE/FLASH or 
SPEAKER, then pressing REDIAL/PAUSE.
While reviewing the redial memory, press MUTE/DELETE to delete the displayed number.
17
