AT&T E2912B, E1112B Options while on calls, Volume control, Call waiting, Multiple handset use

Telephone operation

Options while on calls

Volume control

Press CID/-VOLUMEto decrease the volume. Press DIR /VOLUME+ to increase the volume. When changing the volume level, the new setting is saved.

Flash

TONE

MUTE REDIAL

DELETE PAUSE

	NOTE: The earpiece, hands-free speakerphone and headset
	listening volume are adjusted separately.
	Call waiting
Volume	If you subscribe to call waiting service with your
	local telephone company, there will be a beep if
	there is an incoming call while you are already on a
	call. Press PHONE/FLASH to put your current call
	on hold and take the new call. Press PHONE/FLASH
	anytime to switch back and forth between calls. For
	more information on caller ID, see page 31.

Multiple handset use

While on a call, a person on the other handset can press PHONE/FLASH or SPEAKER to join the same conversation.

A person on either handset can press OFF/CLEAR, or place the handset in the telephone base or charger to drop out of the call, but the call will not be terminated until both handsets hang up.

NOTE: When two handsets are used on the same outside call, the call transfer feature cannot be used (page 17).

14