Number of messages (or during playback, message number cur- rently playing).
PLAY/STOP to begin or end message playback.
Answering system operation
Message playback
Press PLAY/STOP to listen to messages. The system announces the number of messages, then begins playback.
If you have new messages waiting, you will hear only the new messages (oldest first). If there are no new messages, the system will playback all messages (oldest first).
1. PLAY/STOP
“You have [xx] new messages and [xx] old messages”
Message playback begins. See options at right.
2. PLAY/STOP
to end message playback.
NOTES:
1.If F is flashing in the mes- sage window, memory is full. You will have to delete some messages before new ones can be received.
ǎƓ
is 15 minutes.
3.If you receive calls when the memory is full, the telephone will ring 10 times, then answer and announce “Memory is full, enter remote access code.”
4.New (unheard) messages cannot be deleted.
Announcements
ƨ Ɛ
number of messages.
ƨ Ɇ Ɛ
time it was received.
ƨ ɇ Ɛ“End of mes- sages.” If the system has less than five minutes of recording time left, you will hear the time remaining.
Options during playback
ƨ VOLUME button to adjust the speaker volume.
ƨ SKIP Ɠ
ƨ REPEAT to repeat the message cur- rently playing. Press twice to hear previous message.
ƨ DELETE to delete the message being played back.
ƨ PLAY/STOP to stop playback.
To delete all messages
To delete all old messages, press and hold DELETE while the telephone is idle (not during a call, or during message playback).
33