Volume

Flash

Flash

Volume

Telephone Operation

Options while on calls -

Handset and Base

Volume control

Press ^ or V on the VOLUME button on the side of the handset or press ^ or V on the VOLUME button on the base to adjust the listening volume levels (1-5, of which 5 is the highest).

When you change the volume level, the new set- ting will automatically be saved.

Call waiting

If you subscribe to a call waiting service with your local telephone service provider, you will hear

a beep if someone calls while you are already on a call. Press PHONE FLASH to put your current call on hold and take the new call. You can press

PHONE FLASH at any time to switch back and forth between calls.

Three-way conference calls

While a call is in progress, a person at another handset can press PHONE FLASH or SPEAKER to join the call. A person at the base can press SPEAKER to join the call.

Aperson at either handset can press OFF CLEAR, or place the handset in the base to drop out of the conference call. A person at the base can press SPEAKER to drop out of the conference call. A conference call will not be terminated until all the handsets and the base hang up.

Only two handsets (or one handset and the base) can connect to an outside call at any one time.

14

Page 18
Image 18
AT&T E5917 user manual Options while on calls Handset and Base, Volume control, Call waiting, Three-way conference calls