!
Ais displayed when announce- ment only is activated.
1.
SETUP
“Announcement only, record no mes- sages. To change the setting press CHANGE.”
2.
CHANGE
“Off”
3.
CHANGE
“On”
4. 
(Play/ Stop)
Beep
(Option selected).
Answering system operation
Announcement only mode
In announcement only mode, callers hear an announcement but cannot leave messages.
To turn announcement only on or off
Press SETUP repeatedly until you hear
“Announcement only, record no messages. To change the setting press CHANGE.” Then press CHANGE until you hear the option you want (on or off).
Press PLAY/ STOP to store your selection and exit, or press SETUP again to modify other features (see page 35).
To record your outgoing announcement
When announcement only is turned on, calls are answered with a
After turning on the announcement only fea- ture, follow the steps on page 33 to record your announcement. Callers will hear this announce- ment only when the announcement only feature is turned on. Otherwise they will hear the standard announcement asking them to leave a message.
34
