38
Answering system operation
38
Message counter displays

The message counter usually displays the total

number of memos and incoming messages. See the

list below for explanations of other displays in this

counter.

Message counter displays

0 No messages.
1-98 Number of messages/memos, or message
number currently playing (flashes if you have
new messages).
10-99 Current remote access code while setting (see
page 35).
1-8 Current volume level while adjusting.
1-99 (counting) Elapsed time while recording a memo (see
page 37) or announcement up to 90 seconds
(page 33).
99 (flashing) Memo recording exceeded 99 seconds.
F (flashing) Memory is full. Messages must be deleted
before new messages can be received.
CL (flashing) Clock needs to be set (see page 32).
A Announcement only mode is on (see page 34).
-- System is answering a call, or being accessed
remotely.
-- (flashing) System is being programmed or initialized.
On (or) OF Displayed for one second when any feature
option setting is turned on or off.
02, 04, 06, tS Current number of rings while setting (see
page 35).
Message counter