AT&T E5933B, E5934B user manual Changing feature options, Or press RECORD. To con

1.	SETUP
	Press until desired feature
	is heard (see list at right).
2.	CHANGE
	Press until desired selection
	is heard.
3.	SETUP

Answering system operation

Changing feature options

You can change how the answering system operates. Press SETUP repeatedly to hear each feature. Press CHANGE when you hear the feature you want to modify.

Feature options (Default settings underlined)

System announces:	Feature description:
“Announcement. Press PLAY	Press REC/MEMO to record your
or press RECORD. To con-	outgoing announcement (see page 30).
tinue setup, press SETUP.”	Press STOP to stop recording.
Options: [record announcement]
“Remote access code. To	Enter a two-digit number (10-99) for remote
change the setting press	access from another phone (see page 36).
CHANGE.”
Options: [enter 2-digit code] 19

Press to set selection and

move to next menu option.

— OR —

(Play/Stop)

“Message alert. To change the setting press CHANGE.” Options: On / Off

When the answering system is turned on (the ANSWER ON/OFF light is lit) and the message alert function is activated, any new incoming message will increase the flashing number in the message window by one, and a beep tone will sound every ten seconds as a reminder that there are unreviewed mes- sages on the answering system.

Press to set selection and exit setup.

NOTE: To switch off the message alert tone for all

incoming messages, read the section on disabling the message alert function in the list above on this page.

“Announcement only, record	When on, callers hear an announcement
no messages. To change the	but cannot leave messages (see page 31).
setting press CHANGE.”
Options: On / Off
“Base ringer. To change the	Choose this option to turn the base ringer
setting press CHANGE.”	on or off (does not affect handset).
Options: On / Off
“Number of rings. To change	Choose number of rings before the system
the setting press CHANGE.”	answers a call. When Toll Saver is active,
Options: 2 / 4 / 6 /Toll Saver	the system answers after 2 rings if you
	have new messages, and after 4 rings if
	you have no new messages.
NOTES:

1.Press and hold CHANGE to advance the remote access code num- ber by 10.

2.To temporarily disable the message alert tone, press any answering machine key (TIME/SET, SETUP, CHANGE, REC/MEMO, PLAY/STOP, DELETE, REPEAT and SKIP) on the base. This turns off the audio message alert tone but the number in the message window will continue to flash as a reminder that there are unreviewed messages on the answering system. The message alert tone will be re- activated with the next incoming message.

32