AT&T EL51100 quick start Installation, Important Information

Installation

Install the telephone base as shown below. If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL filter on the DSL line. If you want to mount your telephone on a wall, use the included wall mount bracket and refer to Wall mount installation in the on-line user’s manual for details.

Electrical outlet not controlled by a wall switch

Plug the large end of the base power adapter into an electrical outlet not controlled by a wall switch.

Telephone wall jack

Plug the other end of the telephone line cord into a telephone wall jack.

DSL filter (not included) is required if you have DSL high-speed Internet service.

Telephone line cord

Route the cords through the slots.

Plug the small end of the base power

adapter into the power jack on the bottom of the telephone base.

IMPORTANT INFORMATION:

Plug one end of the telephone line cord into the TEL. LINE jack on the bottom of the telephone base.

Use only the power adapter provided with this product. To obtain a replacement, visit our website

at www.telephones.att.com or call 1 (866) 288-4268.