Select MENU
BASE
Telephone Operation
Base settings
Ringers
At this menu you can change ring volumes, or turn the ringers off. You can also select one of six ring melodies. You will hear an example of each ring volume level and ring type as you scroll through the choices.
Follow the menu instructions to select the volume and melody you prefer, then select OK or SAVE to confirm.
NOTE: Choose different ringer melodies for the two different lines so you can easily identify which line is ringing.
Call screening
RDL MENU CID
Highlight SETUP BASE
DIRECTORY
MAILBOXES
SETUP BASE
DISPLAY
^ OK V
Scroll to choose desired item
RINGERS
CALL SCREENING
SET PULSE/TONE
KEYPAD TONE
^ SET V
Select SET
KEYPAD TONE
CONTRAST
RENAME
DEREGISTER ALL
^ SET V
Call screening lets you hear messages at the base as callers leave them. Select ON or OFF, then select OK to confirm.
NOTE: If you selected OFF you will not hear messages as callers leave them.
Set pulse/tone
Factory default setting for both lines is TONE. Change this to PULSE only if you do not have
Keypad tone
The handset is factory programmed to beep at each key- press. Select ON or OFF, then select OK to confirm.
NOTE: If you selected OFF you will not hear beeps at each keypress.
Contrast
At this menu you can adjust the base screen contrast to one of
16 levels. Use - or + to select the level you prefer, then select OK to confirm.
Rename
At this menu you can change the name (up to 14 characters) that appears on your base screen, and identifies your base in all Intercom/Transfer menus. See “Rename” on page 18 for instructions.
Deregister all
Use this option with EXTREME CAUTION. It will make all handsets unusable until each one has been
19
