5 A) To replace the cover, while holding the cover at an angle, gently move the top rear edge of

the cover over the top of the control unit and match up the grooves where the top edge of the cover meets the backplane. Gently push the edge into place.

B)Lower the bottom of the cover until it is secured in place.

Replacing System Modules

1 A) To power down the control unit, pull out the main circuit breaker.

On a PARTNER Plus 220V system, move the on/off switch to the “off” position (“O”).

B)To remove the cover, place one hand on the handle on the bottom front of the cover and place your other hand on the top of the cover.

C)Gently pull the cover up from the bottom and tilt it towards the top until it detaches from the backplane.

2 A) Check the slack in the wires. If there is not enough slack to remove the module without pulling

the line and extension cords free, label and disconnect the wires before continuing with Step 2B.

B)Place one hand on top of the module. With your other hand, grip the plastic bracket on the bottom front of the module, and use your middle finger to hold down the locking tab just below the bracket. Pull out the old module.

C)To insert the replacement, hold down the locking tab and align the dovetail guides on the sides of the modules. Push slowly but firmly until

the module locks into place with two snaps, and is attached to the rear of the backplane and held in place by the locking tab. Do not force the module. If it does not insert easily, remove the module, clear any obstruction, and reinsert.

Main

Circuit Breaker

Power

Jack

Handle

Locking

Tab

18Equipment Upgrades

Page 21 Page 23
Page 22
Image 22
AT&T PARTNER Plus Communications System Release 3 manual Replacing System Modules
Page 21 Page 23

PARTNER Plus Communications System Release 3 specifications

The AT&T PARTNER Plus Communications System Release 3 represents a significant advancement in business telecommunications, designed to cater to the needs of small to medium-sized enterprises. This versatile phone system offers a range of features, technologies, and characteristics that enhance productivity and streamline communication.

One of the hallmark features of the PARTNER Plus system is its modular design, allowing businesses to customize their communication setup according to their specific requirements. This scalability means that as a business grows or changes, the system can easily adapt without necessitating a complete overhaul. With support for up to 48 extensions, businesses can expand their communication capabilities seamlessly.

The system boasts a user-friendly interface that simplifies operation and management. The intuitive design enables users to navigate through features like call forwarding, voicemail, and conferencing with ease. Furthermore, the built-in Caller ID feature enhances call management, ensuring that users can identify incoming calls efficiently, contributing to better customer service.

The PARTNER Plus system also incorporates advanced voicemail capabilities, including the ability to assign voicemail to individual extensions. This feature allows for personalized messages, making it easier for customers to connect with the right department or individual. Voicemail-to-email integration is another powerful characteristic, enabling users to receive voice messages directly in their email inbox, enhancing accessibility.

In terms of technology, the PARTNER Plus system supports both analog and digital lines, offering flexibility in connectivity options. This adaptability allows businesses to choose the most economical solution based on their existing infrastructure. Additionally, the system supports telemarketing and call screening features, helping businesses manage sales and customer communications effectively.

Another notable characteristic of the PARTNER Plus system is its compatibility with various add-on equipment and accessories. This includes cordless handsets, speakerphones, and wireless headsets, which enhance mobility and communication ease within the workplace.

In conclusion, the AT&T PARTNER Plus Communications System Release 3 stands out as a robust and flexible solution for businesses seeking reliable, efficient, and sophisticated communication tools. With its combination of modular design, user-friendly features, and advanced technology, it effectively addresses the evolving demands of contemporary businesses while promoting improved connectivity and productivity. Whether for a small startup or an established enterprise, the PARTNER Plus system is an invaluable asset in navigating the complexities of modern communication.
Top Page Image Contents